A clip is a dart holding device commonly used in clip system blasters. Clips are very useful for fast reloading in a Nerf war.
Note: there is a difference between a “clip” and a “magazine”, however, many use the two terms interchangeably as they both refer to different types of ammunition holders.
Details
History
The first Nerf clip type was released in 1995 along with the Sawtooth. The second clip type was released in 1997 along with the Electric Eel.
It was not until 2007 and the release of the N-Strike Longshot CS-6 and the six dart clip that clips became popular and widely used.
Modification
Modification of clips is uncommon, as clips cannot be opened up without force that runs the risk of breaking them.
Before Suction Darts, Nerfers would modify clips to use other darts like Micro Darts and other non-clip compatible darts, because Streamline Darts and Elite Darts were inaccurate.
Banana clips use a block to help the shape of the clip; if this block is removed, it allows the clip to hold twelve darts.[1]
Other times, Nerfers may combine clips together, such as combining a six dart clip with another six dart clip to make a makeshift twelve dart clip. In some clips, such as an eighteen dart clip, Nerfers may chisel out plastic on the left side so they can see darts loaded when they are right-handed. By drilling a hole into the retainer of the clip, and then putting a guide rod, the clip can load Stefans more properly.[2]
Clip variations
Nerf
Clip system clips
These clips are compatible with all clip system blasters.
Other clips
These clips are only compatible with the blaster they were originally packaged in with. The majority of these clips are discontinued.
Name | Year | Patron blaster | |
---|---|---|---|
Five dart clip | 1995 | Sawtooth | |
Four dart clip | 1997 | Electric Eel | |
Magstrike clip | 2007 | Magstrike | |
Mega Clip | 2013 | Centurion | |
Battlescout clip | 2016 | Battlescout ICS-10 |
Buzz Bee
Clip system clips
These clips are compatible with most Buzz Bee clip system blasters.
Name | Year | |
---|---|---|
Eight dart clip | 2015 | |
Twenty dart clip | 2015 | |
Ten dart clip | 2017 |
Other clips
These clips are only compatible with the blaster they were originally packaged with.
Name | Year | Patron blaster | |
---|---|---|---|
Six shell clip | 2005 | Rapid Fire Tek / Clip Tek | |
Ten dart clip | 2012 | Cougar | |
Three dart clip | 2015 | Air Max blasters | |
Twelve dart clip | 2015 | Air Max blasters | |
Destiny clip | 2016 | Destiny |
Trivia
- All Nerf-branded clip system clips feature one small divot on each of their feed lips. These attach to small nubs found on places such as the Longshot CS-6's clip storage or the Storage Stock to keep the clip from falling.
- Many modern clips feature a set of rubber paddings on their bottom corners. These were most likely added to prevent damage of the clip if it were dropped on a hard surface (or to prevent damage done to anything that the clip may drop on).
- Some 2011 Super Soaker blasters use a similar reloading system with an accessory called the water clip. It functions much like a regular clip, but holds water instead of darts.
- Most clips can fit at least one more dart than advertised as able to do so, but this makes them more prone to jamming.
- Although marketed under the name "clip", the Nerf clip system clips are technically magazines by definition. A clip is used to feed a magazine or revolving cylinder, while a magazine or a belt is used to load rounds into the chamber. Magazines typically have followers; a small, spring-loaded plate that advances rounds into the chamber.
- The Magstrike clip and the Battlescout clip are true clips, as they do not have a spring-assisted follower.
- Despite the Magstrike clip functioning as a proper clip (as opposed to clip system clips), packaging and instructions for the Magstrike referred to it as a magazine.[3]
- Interestingly, the name "magazine" is given correctly to RIVAL magazines and Vortex magazines perhaps due to being newer lines.
- The Magstrike clip and the Battlescout clip are true clips, as they do not have a spring-assisted follower.
See also
References
- ↑ Drifting gambler mods (2016-08-07). Nerf Modulus ECS-10 Clipazine mod. (This changes everything!!!!) YouTube.com.
- ↑ ModWorks Singapore (2011-11-17). Stefan Compatible 18-Dart Clip - Mod Guide! ModWorks.Blogspot.com.
- ↑ Nerf_Dart_Tag_Magstrike@_Firestrike.pdf Hasbro.com.
view • editInterchangeable accessory types | |
---|---|
Blaster accessories | Barrel extension • Bipod • Detachable shoulder stock • Flip-up sight • Grip • Iron sights • Scope • Shield |
Ammunition accessories | Ammo rail • Belt • Chain • Clip (Inline) • Cylinder • Drum • Hopper • Magazine (XLR Disc • High-Impact Round) • Shell • Speedloader |